1 / 5
Dell r740 Heavy Stand / Feet for Side Floor Placement — zdjęcie 1
1 / 5

Dell r740 Heavy Stand / Feet for Side Floor Placement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet to allow the r740 to sit vertically. Heavy enough to prevent tilt and matches rail pins to help them stay in place.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

I didn't really have a good spot for my new (to me) Dell r740 and decided I'd rather just have it sitting at a 90 degree angle to save space. The feet line up to pins for rail attachment points on the server so they can't slip out from under it, which is helpful since I've left one side open to allow easier access to the internals without have to move it. These are obviously not going to prevent a tip-over with decent force, but it uses the server's own weight to stay pretty stable. The models have internal vertical structure to help with the crush forces.

I was thinking about making the holes for the rail pins more of a slide-and-snap situation, but that would become the weakest point and would greatly lessen the tip resistance if it suddenly broke while tipped.

I printed mine in PETG with 5 perimeter walls and 3mm of solid top and bottom with 50% infill. Yes, that used about 75% of a spool per 2 of the feet and took something like 20 hours. Small price to pay to make them truly heavy enough to support the server.

Tagi