1 / 1
740mm / 29" Wide Shop Vacuum Attachment - Super Mega Extendo Edition - 1 7/8" Diameter Hose — zdjęcie 1

740mm / 29" Wide Shop Vacuum Attachment - Super Mega Extendo Edition - 1 7/8" Diameter Hose

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A super ultra wide vacuum attachment that you print in 3 pieces, and glue together, great for garage or hangar floors.

Ocena
0 / 5
Polubienia
8
Pobrania
29
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A super mega ultra extendo version of the simple 1 7/8" vacuum attachment to obtain a whopping 790mm or 29 inches of width. Perfect for cleaning large hangar or garage floors.

This version prints in 3 pieces. Download the 3 pieces, and print them. I recommend printing on back side with the suction area facing up. You will need supports, that will support the ribs, then you can punch them out after. 

Glue them together with whatever you have laying around. I'm pretty sure it probably will work without glue, with a friction fit, but it is probably a good idea to use something that seals air like RTV, gasket maker, etc. 

For the main hose, print with the angled top down for best results and less supports. Works with most 5-10hp Shop Vacuums such as Heart, Dewalt, Shopvac, Rigid, Kobalt, and Craftsman.

Tagi