1 / 2
HO Scale Curved Steel Girder Bridge — zdjęcie 1
1 / 2

HO Scale Curved Steel Girder Bridge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

60 degree turn, 18" radius flat steel girder bridge in HO scale

Ocena
0 / 5
Polubienia
62
Pobrania
618
Wydruki
1
Wyświetlenia
2605
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

I borrowed a basic design from Thingiverse and re-engineered it for a couple of crossings I will have on a future model railroad. Not super excited about the rust effect paint I used so ignore that as it was a first attempt on this sacrificial prototype, but I am pleased with the bridge.

I split the rails from the deck and used superglue to attach the parts, but you could easily print the entire assembly as one piece if you prefer and are willing to add some supports. I was trying to get away from supports and wasn't sure of the quality I'd get on the underside of the top rails if I tried to bridge them as they are pretty long, so I split them rails off and printed them upside down with no supports required. The deck section prints in it's native orientation, flat on the bed.

Tagi