Pop, Hang and Click Valve Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pop it off, hang it up and click it on. A quick and convenient Presta valve cap that you won't lose.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Annoyed with fiddling with and losing screw-on valve caps? This Presta valve cap is designed for one reason: to be quick and convenient. Pop it off, hang it up and click it on!
I spent a lot of time perfecting this design, going through more than thirty different variations to get the geometry just right. The result is a cap that is:
- Instant On & Off: The cap clicks securely into place with a satisfying sound and pops off just as easily when you need to add air.
- Convenient: The integrated spoke hanger gives you a dedicated spot to keep the cap while you're pumping. No more fumbling, dropping, or losing your cap on the ground.
- Reliable: The geometry is dialed in for a stable, wiggle-free fit you can trust to stay put on any ride, from smooth roads to bumpy trails.
This small part makes a big difference in the daily convenience of getting your bike ready to ride. It's a simple upgrade, but one you'll appreciate every time you use it.
Printing Recommendations
- Material: PETG or ASA is highly recommended for its durability, UV resistance, and slight flex. PLA will work, but may become brittle over time.
- Layer Height: Tested with a 0.2mm layer height.
- Supports: None needed! The model is designed to print easily without any supports.
- Walls: 6 walls for the most wear resistance.