Pop, Hang and Click Valve Caps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pop it off, hang it up and click it on. A quick and convenient Presta valve cap that you won't lose.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 69
- Makes
- 0
- Views
- 552
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Annoyed with fiddling with and losing screw-on valve caps? This Presta valve cap is designed for one reason: to be quick and convenient. Pop it off, hang it up and click it on!
I spent a lot of time perfecting this design, going through more than thirty different variations to get the geometry just right. The result is a cap that is:
- Instant On & Off: The cap clicks securely into place with a satisfying sound and pops off just as easily when you need to add air.
- Convenient: The integrated spoke hanger gives you a dedicated spot to keep the cap while you're pumping. No more fumbling, dropping, or losing your cap on the ground.
- Reliable: The geometry is dialed in for a stable, wiggle-free fit you can trust to stay put on any ride, from smooth roads to bumpy trails.
This small part makes a big difference in the daily convenience of getting your bike ready to ride. It's a simple upgrade, but one you'll appreciate every time you use it.
Printing Recommendations
- Material: PETG or ASA is highly recommended for its durability, UV resistance, and slight flex. PLA will work, but may become brittle over time.
- Layer Height: Tested with a 0.2mm layer height.
- Supports: None needed! The model is designed to print easily without any supports.
- Walls: 6 walls for the most wear resistance.