1 / 1
Nexus 5 & Alfine 11 Pinch Bolt Aligment Jig (145/184) — zdjęcie 1

Nexus 5 & Alfine 11 Pinch Bolt Aligment Jig (145/184)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pinch bolt aligment jig for 145 mm and 184 mm spaced Shimano Nexus or Alfine internal gear hubs

Ocena
0 / 5
Polubienia
4
Pobrania
8
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Based on my earlier tool this one has the 145 mm and 184 mm spacing for Nexus 5 and Alfine 8/11 hubs.

The text has been added in the slicer and would require one filament swap to print.

When tightening down the nuts on either side I recommend having a pinch bolt inbetween the nuts so that they align up better. The tolerances on this tool are quite tight on purpose, so you may need a little fettling to get everything to go together.

Hardware needed to finish of this tool:
4x M6x12 bolts, hex or torx head recommended, head diameter 10 mm maximum
4x M6 nuts

The reason this tool requires metal parts that can be replaced, is it's designed to be used in an actual bike repair shop where you need tools to last.

Tagi