Nexus 5 & Alfine 11 Pinch Bolt Aligment Jig (145/184)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pinch bolt aligment jig for 145 mm and 184 mm spaced Shimano Nexus or Alfine internal gear hubs
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 8
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on my earlier tool this one has the 145 mm and 184 mm spacing for Nexus 5 and Alfine 8/11 hubs.
The text has been added in the slicer and would require one filament swap to print.
When tightening down the nuts on either side I recommend having a pinch bolt inbetween the nuts so that they align up better. The tolerances on this tool are quite tight on purpose, so you may need a little fettling to get everything to go together.
Hardware needed to finish of this tool:
4x M6x12 bolts, hex or torx head recommended, head diameter 10 mm maximum
4x M6 nuts
The reason this tool requires metal parts that can be replaced, is it's designed to be used in an actual bike repair shop where you need tools to last.
