1 / 3
X-Shot Fury X - Barrel Clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X-Shot Fury X - Barrel Clamp
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
I didn't have much luck with the original, not sure if its my printer or my installation, or my replacement (9kg spring) but the barrel would keep slipping outwards, causing darts to get jammed.
Instead of a collet, this uses a two part clamp to secure the barrel, then two m3 bolts to attach to the barrel front piece.
Hardware needed :
- M3x25mm bolt (for the bottom - threads into the m3 locknut)
- M3x20mm bolt (for the top - threads into the heatset insert)
- M3x16mm bolt (2x pieces for the clamp)
- M3 heatset insert (M3 - 3mm depth 5mm OD)
- M3 locknut (3x pieces)
- M3 washers (6x pieces - REQUIRED NOT OPTIONAL)

You should leave a gap (pictured) between the clamp and the front piece, so you can adjust and make sure that there's always tension pressing the barrel and seating it correctly.
