1 / 1
CR-6 LGX Lite & Mosquito mount to the CR6 strain gauge — zdjęcie 1

CR-6 LGX Lite & Mosquito mount to the CR6 strain gauge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount the new LGX Lite and Mosquito directly to the Creality CR6 strain gauge

Ocena
0 / 5
Polubienia
11
Pobrania
49
Wydruki
0
Wyświetlenia
957
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A first go at a mount for the LGX Lite and Mosquito extruder to the Creality CR-6.

Detailed description and instructions will follow. As the design follows the same phylosophy as the mounts for the LGX Lite & Dragon and Orbiter & Dragon please check out these for reference.

https://www.prusaprinters.org/prints/137422-cr-6-direct-drive-lgx-lite-and-dragon-mount-to-the

https://www.prusaprinters.org/prints/126838-cr-6-direct-drive-dragon-hf-sf-and-orbiter-v15-mou

update 2022-02-26:
Hotmelt insert design has been improved with a tapered front as per manufacturers instructions
You have to use M3x7x4.2 hotmelts. hotmelts thicker than 4.2 mm will not fit, there just is too little room, SliceEngineering has placed the mount points too close to the filament path and strain gauge mounts.

Tagi