1 / 2
Extractor Fan (160mmx160mm) to 100mm Fan duct
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A converter that allows attachment of a 100mm hose to standard in wall extractor fan (160mmx1600m). I use this to…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A converter that allows attachment of a 100mm hose to standard in wall extractor fan (160mmx1600m). I use this to allow me to extract heat/fumes from my 3d printer enclosure using my workshops built in extractor fan.
Note: As you can see in the photo I added some adhesive foam (2 or 3 mm, I'm not 100% sure) between the print and the wall to ensure a good seal.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Category: DIY