Infinitycube V2 "Powdercoat" Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm bad at printing and have a powdercoat bed, here's a version that's a little easier to print with little extra cost.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 235
- Wydruki
- 6
- Wyświetlenia
- 1582
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution
Remix of austinvojta's wonderful infinity cube. Since I primarily use powdercoated print sheets, good adhesion is often dependant on how much surface area the first layer has, I have had significant trouble cleanly printing this model (around 35 failures). So to achieve consistant print quality for this model, I modded the first layer using prusaprinters built-in primitives to help combat warping on powdercoated sheets, slice at 0.15mm and use flushcutters to snip off the excess plastic. The grey side has the first layer on it, you can see it is clean despite lazy post processing ;-).
Pictured model is printed with Sunlu silk PLA in green/silver, at 0.15mm, color change at 50%, Prusa MK3.