1 / 3
FRAKS Flexarm - Fanttik F2 Pro Rotary Tool Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to mount a Fanttik F2 Pro to the FRAKS flexarm to be used as a "drill press" or precision driller/sander
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (17)Powiązane
I thought it might be interesting to have the same leveling and control behavior of the FRAKS arm combined with a rotary tool, so I made this mounting bracket for the F2 Pro.
This operates the same as the other FRAKS mounts for soldering irons - you'll need 2 6x3mm magnets and heat-set inserts.
Hardware
- 2x 6x3mm magnets
- 4x M3 heat-set inserts
- 4x M3x25-30 screws (any type of head is fine)
Printing
- 4 walls
- 4 top/bottom layers
- 25%+ infill
- Can probably print in any material, but recommend ABS or ASA
Happy printing!