1 / 1
Fridge Door Flap Peg Extender for Frigidaire Gallery — zdjęcie 1

Fridge Door Flap Peg Extender for Frigidaire Gallery

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple extender for the peg on the door flap of french-door Fridgidaire Gallery fridges to ensure it stays in the track.

Ocena
5 / 5
Polubienia
3
Pobrania
13
Wydruki
1
Wyświetlenia
93
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

This is a very simple fix to a problem that I encountered on my Frigidaire Gallery fridge with french doors, where the flap on the left door wouldn't always open/close properly. There is quite a bit of play in the flap assembly, so over time it sags and the peg may not reach the track.

This piece is designed to fit over the existing peg and extend it so that it has a little extra height, making sure that even when the assembly sags the peg slides in the track.

This was designed based on the GRFG2353AF model fridge, so it may fit others but it may not as I don't know their peg dimensions.

2026-11-04: I've added a V2 model which has a thicker wall and so has a wider outer diameter. This one is more durable, I found that the first version broke after a bit more than a year of use due to the thin wall.

Print Settings

PETG or similar strong material suggested (but PLA is likely still fine), since this will be rubbing against the track and the portion that fits over the existing peg is thin. This should be fairly tolerant of most settings since it doesn't need to be extremely precise and it's not subject to extreme forces.

I used 15% gyroid infill, 0.2mm layers.

Tagi