2X4 assembly brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made these to help assemble 2x4 in a 90 degree angle. I adjusted to have 89.3mm in order to have a bit of play
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
Made these to help assemble 2x4 in a 90 degree angle.
Use the side holes to hold in place the 2x4s then you can screw the end together via the openings (frame with 2 holes in the corners) or from outside (frame that is open for both 2x4s).
This came in helpful while I was alone building a 90 degree frame for a screen opening. this made it easy to hold the pieces together while I screwed everything in place.
I updated to 89.3mm opening, gives a bit more play, plus I added a cut at the joining angle in order to view your joint and ensure a good fit.