1 / 3
The Uppra Shroud for the X-Shot Motorized Piston Pump — zdjęcie 1
1 / 3

The Uppra Shroud for the X-Shot Motorized Piston Pump

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Handguard for the Piston Pump by X-Shot. Utilizing designs i have ddone before, based on the Strike Industries GridLok.

Ocena
4,5 / 5
Polubienia
53
Pobrania
123
Wydruki
3
Wyświetlenia
1325
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Aesthetic Handguard i made for the MPP.
Referenced mounting point, and thanks to LoneWolf052 for the provided STEP files so i can edit my own designs to fit nicely.

REQUIRED HARDWARE :
- 2x M5x30mm socket head screw
- 2x M5 Hex nuts (Nylon lock nuts recommended) 
- 8x M3x8 screws for the top and bottom front sections. you can use longer screws but they may jut out and/or into the barrel.
- 2x M3x12 screws for the top back rail.

Thanks to his design, it saved me a ton of time to test fit everything(hehe!)
IMPORTANT:
The stock barrel is 16.1mm OD roughly.
The 16OD barrel centering piece only fits 16mm OD barrels. 
If you want to use the stock barrel, then use the 1625OD centering piece instead.

Tagi