Filament guide - wide and right above the extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wide filament guide to compliment an enclosure top feed system
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Filament feeds from Sunlu dryers on top of my DIY enclosure, down through a wide slot in the enclosure lid and I wanted a guide for inside the enclosure to keep the filament orderly and not rubbing against the cross member. I designed it to be about an inch form the underside of the box, have a mouth wide enough to accept PTFE tubes and keep the tubes feeding essentially vertically into the extruder at all times along the X axis.
It's also pretty flexible (intentionally) so nothing binds or rubs.
It just friction fits on the crossbar.