1 / 2
Filament guide - wide and right above the extruder — image 1
1 / 2

Filament guide - wide and right above the extruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple wide filament guide to compliment an enclosure top feed system

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
205
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

Filament feeds from Sunlu dryers on top of my DIY enclosure, down through a wide slot in the enclosure lid and I wanted a guide for inside the enclosure to keep the filament orderly and not rubbing against the cross member. I designed it to be about an inch form the underside of the box, have a mouth wide enough to accept PTFE tubes and keep the tubes feeding essentially vertically into the extruder at all times along the X axis.

It's also pretty flexible (intentionally) so nothing binds or rubs.

It just friction fits on the crossbar.

Tags