Nozzle for Dyson V8 and Newer Models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle for Dyson V8 and Newer Models – 110 mm x 10 mm
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Nozzle for Dyson V8 and Newer Models – 110 mm x 10 mm
This thin nozzle is designed to fit Dyson V8 and newer models. With a width of 110 mm and a thickness of 10 mm, it is perfect for tight spaces and hard-to-reach corners.
Key Features:
- Optimized Design: Multiple slots integrated to prevent clogging during suction.
- Easy to Print: No supports required. For better adhesion, I recommend using an inner and outer BRIM.
- Recommended Materials: Printed in ABS for optimal durability (0.8 mm nozzle, 0.4 mm layers). PETG is also a good alternative, while PLA can be used for occasional use (not recommended for intensive use).
Perfect for DIY enthusiasts and cleaning lovers looking to enhance the versatility of their vacuum!Thin Nozzle for Dyson V8 and Newer Models – 110 mm x 10 mm
This thin nozzle is designed to fit Dyson V8 and newer models. With a width of 110 mm and a thickness of 10 mm, it is perfect for tight spaces and hard-to-reach corners.
Key Features:
- Optimized Design: Multiple slots integrated to prevent clogging during suction.
- Easy to Print: No supports required. For better adhesion, I recommend using an inner and outer BRIM.
- Recommended Materials: Printed in ABS for optimal durability (0.8 mm nozzle, 0.4 mm layers). PETG is also a good alternative, while PLA can be used for occasional use (not recommended for intensive use).
Perfect for DIY enthusiasts and cleaning lovers looking to enhance the versatility of their vacuum!