1 / 2
Vertical Hull for Wind-up Bathtub Boat V5
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the wind-up bathtub boat with modified underwater guides, allowing the hull to be printed vertically.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This is a remix of the Wind-up Bathtub Boat V5 – with benchmark test – Badewannen Boot zum Aufziehen – Funktionsfähig by Mike.
I slightly trimmed the underwater guides so the hull can be printed vertically. For me, this saved about 2–2.5 hours of print time, required fewer supports (it might even be possible without them), and resulted in better print quality.
Pros:
- Faster printing (2–2.5 hours saved)
- Fewer supports needed (possible to print without)
- Improved surface quality
Cons:
- You cannot achieve the nice layered hull lines by changing filament colors during printing.
Everything else remains fully functional and compatible with the original model.