265 modeli
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
My first bathtub boat so that young and old captains can play in their own bathtub
Miniature Bathtub, part of a coming dollhouses bathroom set. Read more, and get a preview of the set, at: The Bathtub The Bathroom Includes different versions with one / two faucets, with / without faucet holes, with / without bottom plug…
The original model was impressive. The author vandragon_de has made a version without holes for bathtube use, but it has some missing solid geometry at the propellers, so that it won't be properly sliced(with CURA). so I fixed the issue.…
READ BEFORE PRINT PRINT FISH WITH 5% INFIL TO FLOAT PRINT HOOK WITH 100% INFIL TO SINK PRINT REEL WITH PETG TO AVOID BREAKAGE USE SUPPORTS ON POLE USE BRIM ON REEL HANDLE Reel snap fits into the attachment once on the pole. Be careful…
Easy to print and fun boat for the bathtub. 1:25 scale. The model is inspired by a Whaly 310. This model can be printed without supports but some supports in the fore will improve the bridging (see photo). The parts needs to be glued…
A fast spinning water turbine to be directly screwed into the water tap. It really spins like crazy. My children love it as bathtub toy. The turbine has some power but low mass, which renders it exciting but harmless. Anyways, keep your…
Floats on water, meant for the bathtub. No special setting needed, no support. Great gift.
I used PLA, 0,4mm nozzle, 10% infill and 0,2mm layer. NO SUPPORTS needed. I scaled both of the parts down to 40-50%.
Growth for my bathtub fleet. A little tugboat. I had seen a great 3d picture of a tugs and I couldn't get that out of my head. Unfortunately, I don't know where I saw it. So I tried to draw it out of my head. The model was created on this…
This model was designed first and foremost around play, which means it must be seaworthy. One of my other models, the anchor handling tug is a great play toy, but required some specific balance to make the ship seaworthy. This tugboat on…
Just 20min print, fits 180mm bed size. PLA workes perfectly.
I printed with 0.2 layer height and 25% fill. If printing for a Barbie increase the size.
I printed with 0.2 layer height. You can scale it up. Cheers!
This model is a lightly remixed version of the model I found from Natalia Mona Tj over on GrabCad. (https://grabcad.com/library/clawfoot-bathtub-claw-foot-bath-tub) I scaled it down and beefed up the legs for strength, trimmed some…
Deutsch: Habe eine Badewanne für Barbie konstruiert. Die Wannenfüße kann man einfach reinstecken. Wasser kann auch rein, denn sie hält dicht ;) Englisch: I designed a bathtub for Barbie. You can simply insert the bathtub feet. Water can…
Simple drain plug for the bath tub. Dimensions: Bottom - 40mm Top - 70mm Printed with TPE, no supports should be required but I did use them form the build plate only Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Simple boat your children can use as a toy in the bathtub or pool. Printing is simple, no glue is needed. If you encounter any issues with weaknes or with issues during removing supports, please first check your printer setup and filament…
This 3D printed water toy is the perfect activity for kids in the bathtub. The modular system allows the individual parts to be combined in any way you want, creating new water tracks over and over again. The suction cup attachment…
Another Army of Cute Baby Ducklings🐥 , ready to cheer up your bath (yes, they floating on the water)!
This is a very simple model of the Russian cruiser " Moskva " with an artistic impression of the hull damage she sustained before her sinking on the 14th of April 2022 . Printing Nothing special. Both models have slight overhangs but…
quack quack, quack!! 🦆🛁 quack quack GIF:
No supports! This slide was designed to be used with suction cups. I tested it with the suction cups I purchased on Amazon here . I designed my sailboat model model around this slide, so you can print that and let your kid go to town!…
A simple bathtub for a Maileg dollhouse Scale is for one (or two) Maileg mouse and varies between 1:12 and 1:6 scale, you can scale up or down in you slicer. PRINT WITHOUT SUPPORTS
A small simple ocean giant for the bathtub But it's also great fun to play on dry land. Print instructions The first 30 layers should be printed with 50% infill, the rest with 15%. It should just get easier upwards. On the ground, you…
I printed with whit PETG, 10% stuffed, with supports.
Paddli is a simple and robust bathtub boat. Suitable for young and old. The model itself is quite easy to print. Have fun printing :) Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,2 Infill: 10% Notes: The…
Cute dolphin, easy print, no glue and lot's of fun. The compartment(s) can be filled with extra weight e.g. a steel ball or nut (use stainless steel or non-rusting materials). This allows the basic position of the dolphin to be…
This is a bathtub with human feet to hold whatever you can imagine. Dont want to print? Purchase here! https://www.etsy.com/listing/1486416777/bathtub-human-foot-bowl-snack-bowl-home?ref=listings_manager_grid
This is a bathtub fishing pole toy with a functional reel. It requires a short bit of string which you tie to the inner part of the reel and then feed through the pole before snapping the reel together. Tolerances work well for PETG but…
Remix from wind-up Bathtub Boat V5 https://www.printables.com/de/model/631-wind-up-bathtub-boat-v5-with-benchmark-test-badewa/comments/846735. I added an alternative torodial-propeller. Print the torodial-propeller with layer-heigt 0.05…
Hi For the Bathtub Toys contest, nobody created Chandler Bings Boat? Really… Therefore i created this very bad model of the mentioned boat for to Matthew Perry's bath. Trust me, its bad, its ugly, it probably does'nt float, don't print it…
While hiring a plumber to clear my hair-clogged bathtub drain, I learned about drain hair catchers that can prevent hair clogs from forming in the first place. Instead of buying one, I created my own! From similar retail drain hair…
Bathtub toy easy to print and assemble, no glue, no support needed. The flag can be on a tooth pick or a piece of filament from the spool.
This is a remix of the Gardena adapter for bathroom tap. Standard bathroom taps have a M24 thread. I wanted to use the adapter on the tap for my bath tub, but its outlet has a larger diameter with a M28 thread, so I edited the part to…
Thanks to Mike for his great work! Based on his model I redesigned most parts to improve it further, I hope you like it. Improved features: Propeller driveshaft of the original was prone to snapping off. Now it is a 2-piece design, where…
This is a remix of roosteralex82's drain hose holder for those of us who have to empty their portable washing machines into the tub (ask me about my Panda washer!). It juuuust fits a ~4" rim (~10.16cm) and, at 6.75in/171.4mm width, can be…
Wine holder that goes over your bathtub. Less material bathtub edge width = 6-7cm customized for ikea glass candle Print instructions Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament_material: PETG Notes: I really recommend…
Designed to catch hair and other debris while maintaining a high flow. Print upside down, without supports. I'd recommend using a textured/powder coated sheet for better grip.
[EN] Hair catcher for bathtub or shower drain A very effective catcher for catching hair in the bathtub or shower. Not suitable for kitchen sink. Recommended 3D printing settings: Material: PETG (recommended) or other Nozzle: 0.4mm Layer…
Simple bathtub drain hair catch made after I wasn't a huge fan of others around. The hair catch portion is at an angle for good water flow as the catch basin starts to fill with water. Tested with my kids (both have long hair) and it…
Use safe filament Fun submarine for ages 3+
The golden age of river travel can be alive and well in your bathtub with this rubberband-powered paddle-steamer toy. Two paddle wheels and a smokestack give you all the power and stability you need to traverse the mighty Mississippi…
40mm bottom diameter 50mm top diameter. Fits what I guess is a standard sized American tub drain? Print Settings: .2mm Layer Height .4mm Nozzle Raft: No Supports: No Brim: No Material: Voxelab 95A TPU
A fancy, yet relatively low poly bathtub, ready to print. I suggest white for the tub itself, and a metallic color for the feet and spout. You will need support for the base of the tub, as well as the tip of the spout, though the former…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- Introducing a customizable bathtub splash guard designed to…
I guess no description is needed. In case plug does not fit, you can change diameter by using measuring tool in PrusaSlicer. I printed it from flexible filament
Bathtub Drain Hair Trap with removable cavity bottom cover. Not sure how good of a job does as I am testing it still. 2021-12-29 New versions with modified draining slots to increase the openings area R1 2021-12-30 New versions with…
A bathtub game for children (or adults) who like to experiment. The toy is based on the Tesla valve, an asymmetric tube. Here is a small description: https://www.lesics.com/how-tesla-valve-works.html All you need is a syringe and you're…
I modified the xl version of the wind-up knob (aufzieherxl_pla.stl) and the driver (mitnehmer_pla.stl) of the original wind-up Bathtub Boat v5 because the knob kept slipping out. The shaft the knob is sitting on is now longer and it just…
*** Something new: The new one works even better. Suitable for bathtub with Lift-and-Turn Drain with a diameter of 45 mm. Lift-and-Turn Drain will leave a non-removable stake in the center after removing the top stopper, this hair catcher…
Introducing a miniature water wheel for bath time, a print in place fun print designed for children who love the splish-splashing a laugh of tub time! This fun device brings infinite aquatic amusing, designed to transport everywhere below…
Bathtub plug. Use TPU/Flex filament.
I had an old bathtub plug that was falling apart, I made a replacement to print with TPU. Check the included drawing before printing to see if it's compatible with your drain. Enjoy your bath! Print Settings Printer: Anycubic Rafts: No…
Elegant & Ergonomic Bathtub Drain Filter 44mm Filtering part can be removed for easier cleaning. Printing with fine nozzle advised!
Needs to be mounted with double-sided tape (or something like UHU Patafix) because i didnt want to drill holes into my bath tiles The rescale version is to fit on a Prusa MK4
A bung or sink stopper to be printed in FLEX or TPU to replace a rubber stopper. The diameter is ±1 5/8 inch or 41 mm. No printing difficulties for printers supporting flexible filaments. Please, like my 3D model and/or download it, a…
Take 2 or 3 rubber bands, depends on the thickness. The rubber bands go through the hole on the propeller and goes inside the boat and then out on the front (see the second picture). The clearance is small for the propeller, if you have…
Nothing complex, bathtub drain cover, with places to easily take it out. For drains with diameter of 42mm hole. Freecad file is included so you can change stuff. Make sure not to push it in. It should just go in. If you push it in, it may…
This is a sturdy, easily accessible and infinitely extendable organizer for your bathtub corner with enough room to place all the shampoos, soap, gels and stuff for a whole family within reach where it's needed. It's also very…
Let's stay the Philips Hue Go more stable. The power cord can easily stay plugged in. Print Settings Printer: Anet AM8 Rafts: No Supports: No Resolution: 0.2/0.16 Infill: 15 Notes: I created two processes in S3D. The higher the print, the…
This fluffy ball of rage is not enjoying bath time. Covered in bubbly foam and crowned with a rubber duck, he’s silently planning revenge. Perfect for anyone who’s ever hated Mondays, water, or rubber duck-themed humiliation. Bonus points…
A 3D printable vintage-style bathtub on small legs, complete with a towel draped over the side. Perfect as furniture for a dollhouse, diorama, or miniature bathroom scene. This detailed model brings a realistic and charming touch to any…
Mike's wind-up bathtub boat is an amazing model that was very well designed. However I ran into an issue with the driver due to printing using an 0.6mm nozzle. It seems that with these printer settings the driver arms are only getting a…
Nice inflatable boat for playing in the bathtub or pool
Here is a simple stand for the Windup Bathtub Boat V5. It snaps together with no glue and displays the name of the boat. This awesome boat can be found here:…
A simple bathtub filter with cyclonic effect…. Original diameter is 41mm (common european standard size) Resize (both filter and gasket) to fit your drain ;) As a simple return, like and port your makes !
Replacement drain for a bathtub or basin. Freecad file used for design is attached and dimensions can be adjusted as needed Print instructions Category: Bathroom Summary Replacement drain for a bathtub or basin. Freecad file used for…
As you can see, chicks can also swim. Add a little less ballast than I did so that it can float more easily if you like. I used 7g (2 Allen screws M5x16) and printed with 0.2mm layer height without support. Art design by Hannah. Happy…
Bathtub slide for your kids' toys. It holds by one suction cup. Got inspired in this slide , but I tried to make it lighter and to be printed faster. There are two versions, so print either of them: With one suction cup With two suction…
In the shadows of the night, the Bat Duck rises. Cloaked in dark tones and sharp contrasts, this multicolored split model captures the essence of a vigilante who watches over the city from the rooftops… only in duck form. The design is…
Print horizontal with support Filament: PETG 245/90 Fan 20% Walls: 20@ .4 Top/Bottom: 20 @ .2 Infill: 40% Gyroid 25% overlap with alternating walls
My kids had a hard time pulling the original design when the tub was full. I've added a ring that is pliable and will pull upwards, giving a firm grip and making it easier with the weight of tub of water. Must be printed with TPE/TPU to…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . The plate on a standard bathtub…
Modified the drain hose holder from @roosteralex82 to fit on the edge of a bathtub
A two-part candle/glass holder for either a sub-7cm diameter glass/cup or wineglass and a candle. (or anything you want to add to it. The two halves need to be glued together. I used gorilla glue, and it seems to hold up just fine! If you…
The sift is intended for bathtub drains where the plug has an 8-mm center shaft. The model has a 3-mm inner screw, so that you can strengthen and weight the printed shaft with a 3-mm metric screw.
I designed this to fit on bathtub drains especially those without an indentation for a plug, However, I'm pretty sure it would work on just about any tub, sink, utility sink or anything similar. I printed with TPU (If it's not brand new…
This fun Toy is printed out of TPU You fill it underwater and than spray in the bathtub with it Print settings: Remember to always dry your TPU Slow Speed 3 Walls 3 Top and Bottom Layers No cooling Fan for me because my TPU tents to warp…
This hair catch is designed to fit many standard drains that lack a plug or have a removable plug. It's designed to maximize water flow to ensure that, when clear, the tub will drain well during a shower. While it can be printed in many…
Not just any boat, but one intended as a game! Introduce children to concepts such as buoyancy and balance on a ship at an early age. A container ship was chosen, which could not be more striking considering the many containers lost at…
uploaded 16.Oct, competition started (Quick and useful Prints): 17.Oct → Excluded from participation :( These parts are years old, still work - in daily use. I have it printed in TPU (I also recommend) but the material probably doesn't…
Who doesn't like to play with water and spin around things? With this toy waterwheel you can do both :-) The assembled waterwheel has a diameter of 16 cm and it consists of the following parts: Wheel (yellow part) 8 spoons that slide into…
This is a work in progress. Most pieces go together easily now with little or no finishing, but the spring cover still needs refinement. Printing The boat prints in spiral vase mode, with the intention of making it hollow, lightweight,…
27 OCTOBER 2024 UPDATE: V2 with slight tweaks and used Fusion threads instead of the prior process. Added STEP and draft files for gaskets. I printed with the faucet side down and slim tree supports for the inner lip area.
Bathtub Drain Hair Trap, final take, evolved from the initial take: https://www.printables.com/model/107883-bathtub-drain-hair-trap Final take, easier to clean, works just as well as the other takes but allows better flow.
After a couple of years my viega bathtub knob broke down. So i designed a replacement. It supposed to replace knobs that looks like this: You can print it without any supports. You can edit how it looks - just download f3d/step file and…
Sumérgete en la diversión durante la hora del baño con nuestro juguete para la bañera: la Flor Margarita Personalizable. Este juguete interactivo no solo entretiene a los más pequeños, sino que también les permite expresar su creatividad…
Baby bathtub Hook with Mount Materials Needed: Filament material (PLA or PETG) Mount (printed on the side) Hook (printed with support) Double-sided tape Baby bathtub Steps: Preparing the Wall: Choose a suitable location on the wall for…
Does your bathtub and shower faucet also require a manual switching between bathtub faucet and shower head each time, you turn off the water, especially when you have shampoo in your eyes? Well, ours did and it annoyed me. So I designed…
Most overflow drains on tubs are not properly water-sealed, so this is practical because if you are actively taking a bath, you may want to block that drain while you're in the tub. Best printed with TPU Once again, do not pop this on,…
Fully parametric design in F360. Enter plug lower and upper diameter and the height. Print with TPU at 15% infill. If you need a different size, leave a request with required dimensions in the comment section.
This hair catcher was designed as a cone to avoid getting completely covered with hair, and to make grabbing it easier, for cleaning purposes. The fins on the bottom fit snugly into a standard European bathtub or shower drain like the one…
One of the pictures shows the revolved profile for those who are curious about the dimensions. Printed out of PETG. It's been working well now for a few weeks, so I thought I'd share it.
Strainer to catch hair before it goes down the drain. Print it in orientation shown, no supports needed. Print with 3 walls. Dimentions: Outer ring is 70mm diameter and 1.6mm thick Stainer is 38mm diameter and 18.4mm tall
This is a replacement for a knob of our bathtub. It was missing, and I couldn't find any replacement - so I made it myself. Please note that bathtub knobs have no standard mount, each one looks different. This one is mounted on a bolt…
A simple design of a bathtub plug for 40mm drains. Should be printed with TPU (or flexible filaments). Recommended settings Infill: 100% Nozzle: 0.4 Layer height: 0.12 IMPORTANT! (no more to avoid excessive overhangs). I did an initial…
