1 / 1
Over-the-bathtub portable washing machine drain hose holder — zdjęcie 1

Over-the-bathtub portable washing machine drain hose holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drain hose holder for a portable washing machine (e.g., Panda), but it fits over the rim of a 4"/10.16cm bathtub

Ocena
0 / 5
Polubienia
17
Pobrania
272
Wydruki
0
Wyświetlenia
1638
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of roosteralex82's drain hose holder for those of us who have to empty their portable washing machines into the tub (ask me about my Panda washer!). It juuuust fits a ~4" rim (~10.16cm) and, at 6.75in/171.4mm width, can be printed on a Prusa Mini (180x180cm). Fits a 30mm drain hose or 1in U.S. hose.

I used Overture PLA, .25mm. I was unable to get it to print without total supports, although OP had success using .20mm PETG without supports. Without supports (or if you have a bigger print bed), you could make it slightly wider and achieve a better fit!

 

Tagi