1 / 4
Bathtub Plug & Drain Strainer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bathtub Plug & Drain Strainer
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 603
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
uploaded 16.Oct, competition started (Quick and useful Prints): 17.Oct → Excluded from participation :(
These parts are years old, still work - in daily use. I have it printed in TPU (I also recommend) but the material probably doesn't matter.
Drain Strainer
- I created a support, see WannSiebSupport.3mf
- I did a little work on it: hot blow dried it to bend the bottom side up a bit (I think that was necessary because of the high center of the drain) and of course to get rid of the stringing.
- fusion file attached
Plug
- the plan was that you have to push it in, but it is actually too small, what doesn't matter at all. It seals really well. So the tolerance is relatively "generous"
- I didn't find the 3mf but it is straight forward: upside down, without support
- fusion file attached