USB Type C connector for head tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are attachments for an integrated charger on your bike to integrate a USB type C connection in the head tube.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 828
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model allows the integration of USB type C on your head tube (Ahead system). With 3mm LED based on the charger "Forumlader". For which this mount was designed by Wahoo. Optionally, a model with a Wahoo Element Bolt mount is attached. Other Wahoo systems have not been tested.
Note: The mount is 9mm high and is only held in place by the end cap.
Tip: If you want to replace a USB-C on an existing USB-A, this can be purchased via a JRC-B008 for a few euros. To operate the USBC socket, it is necessary to apply a voltage to the CC pin (pin on back of PCB) depending on the output current. In my case 1.7V to output 3A from the USB-C socket. I realised this via a voltage divider from the output voltage of 5V.
The Wahoo mount is based on the following:
https://www.thingiverse.com/thing:3752313/files