USB Type C connector for head tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are attachments for an integrated charger on your bike to integrate a USB type C connection in the head tube.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 828
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The model allows the integration of USB type C on your head tube (Ahead system). With 3mm LED based on the charger "Forumlader". For which this mount was designed by Wahoo. Optionally, a model with a Wahoo Element Bolt mount is attached. Other Wahoo systems have not been tested.
Note: The mount is 9mm high and is only held in place by the end cap.
Tip: If you want to replace a USB-C on an existing USB-A, this can be purchased via a JRC-B008 for a few euros. To operate the USBC socket, it is necessary to apply a voltage to the CC pin (pin on back of PCB) depending on the output current. In my case 1.7V to output 3A from the USB-C socket. I realised this via a voltage divider from the output voltage of 5V.
The Wahoo mount is based on the following:
https://www.thingiverse.com/thing:3752313/files