200 models
I've coospo and noticed that fit with garmin model this remix contains modification of lock ring to hsw.
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
A clamp for pipes. Made it for the maststand on a Libre Micro racer (landyacht) See more on landyachting on crazyeti.com The clamp fits 60 - 63 mm pipes. You need to assemble the mount to the clamp manually. Gives a better print result.…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
Rocker feet for Wahoo Kickr core v2. Needs 2 additionnal tennis balls per feet. Designed to work with kickr core rubber feet still in place. The goal is to have more compliance in the trainer and be more comfortable during indoor training.
There are loads of Garmin interfaces out there, but (in my opinion) they all fail for one of two reasons: the intended print orientation is horizontal, thus mandating support structures that are difficult to remove and leave residual…
I created this model because when I tried to replace the battery in my Wahoo Tickr the cover's pins deformed and snapped. It would no longer seal with only two pins available so I designed this replacement cover for myself. I went through…
Another Garmin bracket, this time with mountain bikes in mind. The clamp can be printed in place, with no supports necessary. The interface itself is in several parts, to improve durability and make it easier to print, again without…
Inspired by the model created by Pico, I created new model which better matches size of the original cover and also of the sealing ring (diameter approx. 25.5mm). Model created in OpenSCAD.
Printed in PETG with a 0.8 mm nozzle. The .3mf file includes modifiers to increase the density and the thickness of the vertical walls. Wahoo KICKR Core 2 version:
A small adapter plate to convert a quarter-turn mount to 2-pronged GoPro. There are plenty of models to convert to a 3-pronged GoPro mount, but I struggled to find one to go to the other side of the GoPro mount. Note that there are two…
v2: Top surface is flat now so it can be easier to print upside down sturdier constrcution through softer radii Original Garmin and Wahoo mounts can be used with screw holes, mounts will fit without protruding Update: Wahoo compatible…
Simple adapter for a wahoo head unit to fit onto a garmin mount, the other designs here seemed to be unnecessarily thick.I printed it at 100% infill but you could probably get away with less, id recommend printing it on its side (with it…
A small adapter plate to convert a quarter-turn mount to 2-pronged GoPro. There are plenty of models to convert to a 3-pronged GoPro mount, but I struggled to find one to go to the other side of the GoPro mount. This is designed to accept…
Tennis ball rocker foot for increased comfort on your Wahoo Kickr V5. Probably works with other Kickr versions but not tested. Ball diameter is 65mm which should fit most tennis balls. There is more than 2cm of vertical travel space which…
About This is a set of replacement feet for the Wahoo Fitness KICKR CORE 2 Smart Trainer which hold tennis balls to allow the trainer to rock and move slightly while riding. This can reduce fatigue and lead to longer rides and more…
I made this mount for my Wahoo Element Roam. I think it should also work with Garmin and Hammerhead devices, it would be cool, if someone could try this out. Best print in the same orientation as you would apply to the bike, so the 2…
I got a Wahoo Elemnt Bolt to replace an old and quirky Garmin Edge 500, and discovered that although the mount looks like a Garmin mount, it's rotated 90 degrees. I had been using Bryce's Garmin stem mount and he was nice enough to rotate…
Wahoo KICKR CORE 1 Tennisball Rocker Feet to have a more dynamic and comfortable setup when riding. in addition you'll need two tennisballs per feet, so 8 in total. fits easily on 225 x 225 printbeds prints without supports make sure to…
I wasn't happy with the available models of these as I find them to be unnecessarily bulky and also elevate the trainer more the necessary, so I designed my own. I've had these installed for around 2 months of daily riding now and it…
This is a printable handlebar or stem mount that can be used to attach a Wahoo ELMNT series bike computer to a bicycle. It is composed of three rigid components (modified versions of the model I remixed) and a single TPU/flexible…
Enhance your cycling setup with our Aerobar mount designed for Garmin or Wahoo cycling computers, featuring a GoPro adapter for easy attachment of accessories like cameras or lights. This versatile mount ensures a secure and streamlined…
Update 2019 Aug 15: I was contacted by nichenke who tried to fit this on the Wahoo Elemnt and it didn't fit. He tried to modify the original design from the F3D file but it didn't update right. I tried and got the same results. I've found…
Simple stand to hold a Wahoo or Garmin bike computer (the mounts are similar but rotated 90 degrees) on the edge of a charging area. A Garmin mounts more securely as the mount “ears” are on the sides, but a Wahoo stays in place just fine.…
A mount for the Wahoo ELEMNT V2 for Canyon Handlebars with gear grove
I've had my Wahoo Cadence sensor for a couple of years, the clip plastic became brittle and cracked when I took the sensor out. I made this replacement, because you cannot buy one.
Depending on the size of your printer or how large you want to print this model, you may want to separate the bodies in each STL. I printed all of the pieces face-down on the textured sheet to give it a cool finish. 09/25/2023: Updated…
I modeled it after the original Kickr Snap. It's quite sturdy because I'm quite heavy. It takes ages to print, but it is sturdy. Did I mention it is sturdy? I printed it with draw on supports. Just for safety. Maybe if you use adaptive…
Put your bike computer on your skadis!
I printed many versions of this on my resin printers, I haven't tried it with FDM, I don't think it would work but perhaps with a .25 nozzle. I can't find a way to get it to print flat on the build plate and not fill in the coin slot, It…
Hey, recently I purchaised great Wahoo Bolt (v2 2021) bike GPS computer. Original mount is fine but I needed something that is longer not to “look down”. I present You my version of handlebar mount (longer than original) for the new Wahoo…
Requires Tim's lockring, spring and assembly tool (included slightly scaled versions that worked better for me, using PETG) And 2 M3 bolts for a complete assembly. UPDATE: Added version 2 with more left offset, so the unit will be in the…
3D-printed clip mount for the Wahoo Speed Sensor, designed for reliable attachment to your bicycle hub. My friend, an active cyclist, has been using this model extensively in real rides, including rough terrain, and it has proven to hold…
Inspired by Wahoo Kickr Steer. This phone holder mounts to original out front wahoo mount and is intended for cycling on indoor trainer.
Few things to consider: uses the existing screws that came with the cover I re-drilled the holes with a 1.5mm drill bit remember to place the battery the correct way Wahoo and Garmin (¼ turn) files included some fine tuning with an…
I recently got a Wahoo Kickr Core bike trainer. You need to use a couple spacer adapters in order to mount a thru axle bike on the trainer. These adapters are retained when a thru axle skewers them, but they're loose when you remove your…
I needed a handy platform pedal to clip on my Speedplay pedals. I wanted a small pair of platforms I could use for a short ride and then stove them into my pockets. The whole design process went through several different models. I have…
I have seen rockers for bike trainers using tennis balls, but nothing for the Wahoo KICKR Shift Bike. I really like the bike, but on longer rides, would be nice to have a bit more movement when in the saddle. These replace the rear feet…
These are rocker feet for a Wahoo Kickr Core 2. You need 4 feet and 2 tennis balls per feet. The cup has a diameter of 67mm so standard tennis balls should fit. If your balls dont fit, i can adjust the design. I printed my feet with 8…
I wanted an out the front mount for my wahoo elemnt roam for my canyon h11 cockpit. the mount that I got from canyon did not flow well with the aerodynamics of the wahoo mount so I made one. This one is like the canyon mount and the wahoo…
The original port cover disintegrated so I designed a new one to help protect the port. Print in TPU with the USB logo facing downward on the plate.
I was tired of my 3D printed bike computer mounts breaking so I designed mounts to be made out of TPU. After several test designs, I settled on two mounts to connect to the stem or the top cap. Both designs have been tested on my mountain…
I have had heard about something like this already and have seen a buyable version on Amazon Germany for about 80 € without Tennisballs, that was way to expensive for buying 3d printed parts for me, therefor I quickly designed this part…
Gotta charge your bike computer and might forget to put it back on the bike before you go for a ride? Or maybe you've got one computer and several bikes and the computer might be on a different bike than you're about to take? Pop this…
This stem Mount fits nicely in the handlebar mount on the Brompton C-line. I have the straight handle bar but i assume the other types fit aswell. I recommend using at least PETG, also i reduced the wall count to two and set the infill to…
Version-1 Made a Wahoo mount with a Bontrager Ion light mount on the bottom. Changes in Version-2, 1/30/21; Moved the light mount at the back for less weight distribution rather than when it was on front. Made the bottom part similar to…
Update 18 Nov 2019: I've got a Trek MTB which has their Knock Block which uses keyed spacers - I've modified the design to be compatible with Knock Block and uploaded that STL, and also added my Fusion 360 source file. A mount for the…
Printed in PETG with a 0.8 mm nozzle. The .3mf file includes modifiers to increase the density and the thickness of the vertical walls; it will only works if you use PrusaSlicer. If you don't use PrusaSlicer, use the .stl file and make…
Jedná se o držák pro Garmin či wahoo computer. Držák je určen na přichycení držáku šrouby k řídítkům. Oprava 3.7.2025 vnitřní průměr pro držák 34mm, zesílený na výšku 7mm, tisknout 100 procent výplně.
These components replace the existing removable base and “outriggers.” They allow for side-to-side rotation whilst on the Wahoo Kickr trainer (which wasn't an option on the older models) In addition to the printed parts, one needs to cut…
This mount has been carefully designed and printed for easy support removal in mind. You can simply push from the top , and the support will pop out clean, no struggle. 🌀 Outer diameter: 33.9 mm (roughly 34 mm) 📏 Thickness: 5.8 mm…
Holder for WAHOO ELEMNT cycle gps computer.
Not tested yet. USE AT YOUR OWN RISK
Fix for broken tabs on Wahoo Element Roam, which broke off after fitting the Roam into the wrong adapter. Printed with PLA and glued with epoxy glue - still holds after 6 months of active use. Since the model will be used outdoors it…
The lid of my Wahoo Tickr heartrate monitor broke and the contact oxidized a bit. I made this lid which fits very nicely. The monitor still does not work properly, maybe the lid is not fully tight. Improvements can be done. Careful…
Wahoo\Garmin mount for Scott Creston handlebar. Original Wahoo\Garmin stem mount + 2x M4x14mm bolts needed. Versions: Wahoo_S - short version for Bolt Wahoo_L - long version for Roam Garmin_L - long version for 1040 Print the mount,…
Use the original or any other Wahoo quarter turn adapter with original screws. Add 2 M3 bolts from the backside (works best when screwing them in lightly from the front without the quarter turn adapter first to press them in). I added 2…
Chief Wahoo Coaster stl file There is also 2 different 3mf files for Bambu Labs 1 is with Red Letters, but its hard to see with Blue 1 is with White Letters which is easier to read
Very sturdy computer mount on the headset of the bike. Uses existing insert or print the one I provided (universal for wahoo or garmin). For garmin have the screws vertical, for wahoo horizontal. There are multiple files, so what is…
The files include just modified versions of the base for Garmin in three variations: Basic, 90-degree angled, and Garmin Duplicator. The rest of the files are in the original model…
Well, friends of cycling and those who want to become one. You know the drill: You buy wonderful stuff for your bike. Those things accumulate over time in your nice flat. These gems are all over the place. Your significant other really…
Garmin varia quarter turn mount to be used with the KOM cycling replacement discs I have lots of these KOM cycling replacement discs sitting around and they don't fit into the original models as well as I'd like https://a.co/d/5bqcLKX -…
I was getting tired of the cluttered bar on my roadbike so i decided to create a wahoo mount that could also hold a light or a spare battery for my wahoo. You will have to buy the inserts to make this work. I used those:…
The classic Cleveland Indians logo (Chief Wahoo) in red, blue and white, as a flat multicolor print for a magnet, a sign or a frame. Slice with the Arachne wall generator, or the thin lines won't print. Print at 100% infill unless you…
I never knew where to store my Wahoo ELEMNT Bolt V2 during travel. This box now keeps it safe. I was in a hurry, so this was a quick and dirty design. I used the box from @asymptoticwalnut for the geometry and just sized the rugged box…
This is an updated version of my previous mount (https://www.printables.com/model/69283-wahoo-bolt-v2-2021-mount-long) As I improved my Fusion skills also the design IMHO looks much better. Also It has a gopro mount at the bottom side to…
Recently I purchased a Wahoo Elemnt BOLT. I was under the impression (based on ads on the Web) that it would come with a 31.8 to 25.4 mm reducer to fit my classic Sakae Royal drops. It didn't. Wahoo has no plans to offer them in their…
This mount allows you to attach a Garmin or Wahoo bike computer under a bottle cage placed between aero bars. It provides a clean, aerodynamic, and compact setup , perfect for triathlon or time trial positions. Positions the computer…
My partner was unhappy about the handle he bought for Wahoo for Rose Reveal bike because it was unstable and was tipping. As a result I took part for Xlite bike and modified it in Prusa Slicer to make it possible to attach to Rose Reveal…
Overview This is a series of replacement feet for the Wahoo Fitness KICKR CORE 2 Smart Trainer that raise it up higher than stock. The axle of the KICKR CORE 2 is around 332mm above the ground. This is about the same height a a 700c x…
To print, you still need b-luds tpu pad. Instead of his case, you can print the changed one. Print settings: Print with mount facing up and support for the bottom (good support settings needed). You wont see the support interface later…
Wahoo adapter for the Z1 Cycplus mount, pretty inexpensive and easy to find in AliExpress or similar webpages. I also increased the height so the Wahoo doesn't touch the mount when mounting it. You will need M3 heated inserts for…
These are fully 3D printable Wahoo bike computer interfaces for all possible print orientations. Even the flexible tabs holding the Wahoo in place are fully printable with print orientation taken into account. They can be fully integrated…
What is it? I made a mount for mounting bikecomputers like a Garmin,Wahoo or Sigma for example. The second part of the project was to integrate my lights to it aswell. The light adapter was designd for the Sigma Aura 100. I made two…
A coworker requested I make them a way to mount their Wahoo computer to the top tube accessory mount of their Salsa Timberjack.
The original version does not include any front damping. This version is heavily modified compared to the original, as the bike height has been raised by 3 cm, allowing the creation of a front support. With this change, the effect of the…
90 degrees adapter plate so you can use your gamin mount to place a wahoo bike computer. The plate is just over 1mm. so you can use your existing mounting screw, but please make sure you do not over tighten it, because Garmin has not…
This carriage plate adapter helps provide a way to mount any toolhead you can fit. Remember, this is the BLANK to be used in CAD to add your own mounting holes. I will be posting a remix of this with XOL mounting pattern. Please, if this…
Garmin Varia & Wahoo Element Bolt holder, that also lets you charge them
A Garmin/ Wahoo top tube cyclingcomputer mount. Use double sided tape to mount. The design allows use with all tube shapes. I also uploaded the Freecad files if you want to modify it
My wahoo element bolt started rattling inside the k-edge mount. So This is a redesign of the original blue k-edge insert, with a slightly tighter fit. Printed in pc-abs mix with 0.15 mm layer height, 3 perimeters, and with supports. PETG…
Because I used the default mount point for bicycle computers of the “Canyon CP07 Cockpit CF” to mount my light and GoPro, I designed this mount for the Wahoo ELEMNT Roam V2 to be placed on the upper flat pipe of the handlebar. NOTES: The…
J’ai créé ces pièces d’adaptation pour axe traversant afin de pouvoir monter un vélo à axe traversant sur un Wahoo KICKR Core . Elles sont prévues comme alternative aux adaptateurs d’origine , que ce soit en pièce de rechange ou si tu…
First, be advised that this model might damage your Wahoo unit if the print is not precise enough. I still added a tolerance 0f 0.20mm around Wahoo's own mount files, but the printed mount might scratch your unit. For testing purposes,…
as the Hori only comes with a Garmin compatible mount and for some reason they choose to not make the interface indent in a way it's usable with both I had to design this one to fit Wahoo bike computer mounts (90° turned compared to…
TL;DR: This is a quick and easy Magsafe mount for your Wahoo Elemnt bike computer mount. Designed for indoor use. Fit tested with iPhone 15 Pro, 15 Pro Max, and iPhone 12 Mini Easy Press-fit with Apple Magsafe pucks. Model has holes on…
This is an extension for my Garmin/ Wahoo handlebar mount. It adds a GoPro compatible mount at the bottom. You can convert the GoPro mount to an additional Garmin/ Wahoo mount and use it for a front light. The complete kit contains of two…
Mount designed for Wahoo and Garmin bike computers. There are two different models available depending on the bike computer connector. I scanned the cockpit using a 3D scanner to get a proper fit . The scan is also available as .stl file.…
A small miniature of the Wahoo Kickr Core 2 as a table decoration and for motivation. Printing: Either use the all-in-one model with supports or print the individual parts and glue them together. I tried both methods, and the…
Hello This is the adaptor that enables you to use almost every Orbea road bike that uses a 12x142mm thru-axle on a Wahoo Kickr Snap trainer . The design is taken from the original Wahoo Kickr Snap 12x142mm Thru Axle fine Adaptor , with…
You'll need to drill the holes a little bit bigger to fit the bolts through… or adjust the hole size to be bigger. As the Wahoo bolt spacing and the GoPro bolt spacing is very slightly different.
Designed to hold wahoo elemnt bolt v2 and protect from scratches while in a bag during travel. Uses 6x1.75mm magnets from amazon that can be found here . Printed in overture PLA at 0.3mm layer height on prusa mini+. I believe that the…
Wahoo Elemnt Bolt Phone Holder for indoor Rides allows you to place your phone right in front of you when riding indoors with Zwift. Based on the mount from Peter_B I just added a flat space to put down my phone which is an iPhone 15 Plus.
Ever wanted to use your Garmin or Wahoo cycling computer like a wristwatch ? No? Well now you can! This adapter plate lets you strap your bike computer to your wrist using a basic strap and buckle —no fancy accessories needed. Just grab…
I needed a combined mount for my Wahoo Elemnt Bolt v2 and Bontrager ION 200 RT front light. I made use of the Blendr system from Bontrager to neatly combine and fit them to my stem. Some additional requirements to complete the build:…
Due to the fact that the original sensor shoe mount by Wahoo is only usable up to a size of roughly 2.5cm for the laces/velcro fastener I made a version that is also suitable for wider laces - like on Triathlon shoes and also has a better…
Adapter for mounting regular bottle cage to Wahoo KICKR Indoor Cycling Desk . I tend to need more than two bottles when riding indoors, so made these to hold additional bottles within reach. Mounts to slot meant for phones and tablets.…
In the slim chance any would ever need this. Got annoyed with those rubber holders that come with the fan and strap to your handlebar and made this. Holder for remote(s) for probably the best indoor training fan there is, Vacmaster…
Rather than drilling holes in this really good design, I decided to do a quick remix to add holes for the Wahoo style mount so I could mount my Wahoo Element Roam. It will fit a Bolt also.... I loved the Bell Idea and it's super hard to…
@TimAngus 's 3D printing friendly Garmin/Wahoo interface is great, so I modified it to make a mount for the Wahoo Trackr Radar on a saddle bag. I use a Topeak saddle bag with the light mount on the back, which is a fabric loop that is…
Wahoo Elemnt to GoPro-mount Mount for Wahoo Elemnt to attach the bike computer to a GoPro mount. For a clean look and a tidy cockpit. e.g. on the BBB StemFix BHS-91 holder or BMC ICS., and many more.…
I purchased a Wahoo Kickr V6 used and it was missing this adapter. Printed in PLA with the flange closer to the bed, support on, no post-processing required other than removing the support material. STEP file included in case you need to…
![Wahoo Mount for Aerobars [parametric]](https://media.printables.com/media/prints/adcf97cd-4f21-4667-adeb-4e3b9f951e91/images/10376479_36ca1252-17dc-44fd-adc6-a93c78e58985_07e9ad91-3dc2-408a-840a-005ac331612b/2025-08-03-21_46_18.png)
