Wahoo Trackr Radar Saddle Bag Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A clip for mounting the Wahoo radar/light on the back of a saddle bag.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
@TimAngus's 3D printing friendly Garmin/Wahoo interface is great, so I modified it to make a mount for the Wahoo Trackr Radar on a saddle bag. I use a Topeak saddle bag with the light mount on the back, which is a fabric loop that is 20x20x3mm. This uses the back of the radar itself to lock to the bag when installed.
This will need to be printed with supports, but only in the clip area; orient on the bed so the quarter turn mount so it doesn't need supports just like the original model (the surface facing out from the bag in the picture faces down on the print bed). The rough surface from support removal will be completely hidden when in use. I did not include the other parts from the original mount (wahoo interface spring and lockring), you will need them from the original model.
I suggest at least PETG (not PLA) for UV resistance and for it to not get mushy you leave it in a hot car. I printed mine with 0.1mm layer height PETG on a MK3S, it works great and the radar locks in with a very satisfying click - thicker layers probably work fine too.