1 / 8
31.8 to 25.4 mm Reducer For Wahoo Elemnt BOLT Out Front Mount — image 1
1 / 8

31.8 to 25.4 mm Reducer For Wahoo Elemnt BOLT Out Front Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Recently I purchased a Wahoo Elemnt BOLT. I was under the impression (based on ads on the Web) that it would come with…

Rating
0 / 5
Likes
9
Downloads
85
Makes
0
Views
457
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Recently I purchased a Wahoo Elemnt BOLT. I was under the impression (based on ads on the Web) that it would come with a 31.8 to 25.4 mm reducer to fit my classic Sakae Royal drops. It didn't. Wahoo has no plans to offer them in their sets, or separately, so I decided the simplest, cheapest, easiest answer was to design and make my own.

I've provided two designs, one for the OEM mount that comes with the BOLT, seen on my (black stem) Specialized Hard Rock, and one for karlzhao314's design ( https://www.thingiverse.com/thing:3255166 ) which I've mounted on my (silver stem) custom Miyata One Twelve.

See karlzhao314's post for installation and bolt/nut sizing.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.28mm

Infill:

20

Filament: Hatchbox PLA Black


Notes:

I've printed without a brim, but would suggest that you do if you have had, or continue to have, problems with small and thin models sticking to your bed. I found using a low-quality setting is best, providing a 'rougher' contact surface on the clamp and bars. I've only printed this in PLA. If you end up successfully printing this in ABS or PETG, let me know.

Category: Sport & Outdoors

Tags