Rocker Mounts for Wahoo KICKR Shift Bike
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rocker mounts using tennis balls that replace the back feet on a Wahoo KICKR Shift Bike to give some compliance.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 192
- Makes
- 0
- Views
- 2,971
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I have seen rockers for bike trainers using tennis balls, but nothing for the Wahoo KICKR Shift Bike. I really like the bike, but on longer rides, would be nice to have a bit more movement when in the saddle.
These replace the rear feet on the Shift and should slide over the tubes without removing the end caps. I have also added a hole for an M10 bolt if you want to secure them to the tube, when I printed these in ABS it was a nice tight fit that I don't think needs the bolts.
I used some tennis balls that I had lying around, I measured them at 63mm, and they press into the pockets and don't drop out.
I printed these in ABS with 1.8mm walls and 10% gyroid infill and they seem to hold up well.