Rocker Mounts for Wahoo KICKR Shift Bike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rocker mounts using tennis balls that replace the back feet on a Wahoo KICKR Shift Bike to give some compliance.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 2954
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I have seen rockers for bike trainers using tennis balls, but nothing for the Wahoo KICKR Shift Bike. I really like the bike, but on longer rides, would be nice to have a bit more movement when in the saddle.
These replace the rear feet on the Shift and should slide over the tubes without removing the end caps. I have also added a hole for an M10 bolt if you want to secure them to the tube, when I printed these in ABS it was a nice tight fit that I don't think needs the bolts.
I used some tennis balls that I had lying around, I measured them at 63mm, and they press into the pockets and don't drop out.
I printed these in ABS with 1.8mm walls and 10% gyroid infill and they seem to hold up well.