1 / 2
Wahoo Kickr Core 2 Tennis Ball Rocker Feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Feet to make the Kickr Core 2 a little less rigid using tennis balls
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 209
- Makes
- 0
- Views
- 1,206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
These are rocker feet for a Wahoo Kickr Core 2. You need 4 feet and 2 tennis balls per feet. The cup has a diameter of 67mm so standard tennis balls should fit. If your balls dont fit, i can adjust the design.
I printed my feet with 8 perimeters with a 0.4mm nozzle. This way the oppisite walls connect which should be quite a bit stronger. Infill pretty much doesnt matter. I used 15%.
These feet dont hold the tennis balls on their own. I used a bit off double sided tape to keep them from falling out.