1 / 2
Wahoo Kickr Core 2 Tennis Ball Rocker Feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet to make the Kickr Core 2 a little less rigid using tennis balls
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 1178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
These are rocker feet for a Wahoo Kickr Core 2. You need 4 feet and 2 tennis balls per feet. The cup has a diameter of 67mm so standard tennis balls should fit. If your balls dont fit, i can adjust the design.
I printed my feet with 8 perimeters with a 0.4mm nozzle. This way the oppisite walls connect which should be quite a bit stronger. Infill pretty much doesnt matter. I used 15%.
These feet dont hold the tennis balls on their own. I used a bit off double sided tape to keep them from falling out.