Counting matching models…
Rocker feet for Wahoo Kickr core v2. Needs 2 additionnal tennis balls per feet. Designed to work with kickr core rubber feet still in place. The goal is to have more compliance in the trainer and be more comfortable during indoor training.
Printed in PETG with a 0.8 mm nozzle. The .3mf file includes modifiers to increase the density and the thickness of the vertical walls. Wahoo KICKR Core 2 version:
Tennis ball rocker foot for increased comfort on your Wahoo Kickr V5. Probably works with other Kickr versions but not tested. Ball diameter is 65mm which should fit most tennis balls. There is more than 2cm of vertical travel space which…
About This is a set of replacement feet for the Wahoo Fitness KICKR CORE 2 Smart Trainer which hold tennis balls to allow the trainer to rock and move slightly while riding. This can reduce fatigue and lead to longer rides and more…
Wahoo KICKR CORE 1 Tennisball Rocker Feet to have a more dynamic and comfortable setup when riding. in addition you'll need two tennisballs per feet, so 8 in total. fits easily on 225 x 225 printbeds prints without supports make sure to…
I wasn't happy with the available models of these as I find them to be unnecessarily bulky and also elevate the trainer more the necessary, so I designed my own. I've had these installed for around 2 months of daily riding now and it…
I recently got a Wahoo Kickr Core bike trainer. You need to use a couple spacer adapters in order to mount a thru axle bike on the trainer. These adapters are retained when a thru axle skewers them, but they're loose when you remove your…
I have seen rockers for bike trainers using tennis balls, but nothing for the Wahoo KICKR Shift Bike. I really like the bike, but on longer rides, would be nice to have a bit more movement when in the saddle. These replace the rear feet…
These are rocker feet for a Wahoo Kickr Core 2. You need 4 feet and 2 tennis balls per feet. The cup has a diameter of 67mm so standard tennis balls should fit. If your balls dont fit, i can adjust the design. I printed my feet with 8…
I have had heard about something like this already and have seen a buyable version on Amazon Germany for about 80 € without Tennisballs, that was way to expensive for buying 3d printed parts for me, therefor I quickly designed this part…
Printed in PETG with a 0.8 mm nozzle. The .3mf file includes modifiers to increase the density and the thickness of the vertical walls; it will only works if you use PrusaSlicer. If you don't use PrusaSlicer, use the .stl file and make…
These components replace the existing removable base and “outriggers.” They allow for side-to-side rotation whilst on the Wahoo Kickr trainer (which wasn't an option on the older models) In addition to the printed parts, one needs to cut…
Really not all that different than all the others out there, but I wanted to soften the look a little and reduce the material required. I printed these out of ABS with 30% gyroid infill.
Overview This is a series of replacement feet for the Wahoo Fitness KICKR CORE 2 Smart Trainer that raise it up higher than stock. The axle of the KICKR CORE 2 is around 332mm above the ground. This is about the same height a a 700c x…
The original version does not include any front damping. This version is heavily modified compared to the original, as the bike height has been raised by 3 cm, allowing the creation of a front support. With this change, the effect of the…
J’ai créé ces pièces d’adaptation pour axe traversant afin de pouvoir monter un vélo à axe traversant sur un Wahoo KICKR Core . Elles sont prévues comme alternative aux adaptateurs d’origine , que ce soit en pièce de rechange ou si tu…
A small miniature of the Wahoo Kickr Core 2 as a table decoration and for motivation. Printing: Either use the all-in-one model with supports or print the individual parts and glue them together. I tried both methods, and the…
Hello This is the adaptor that enables you to use almost every Orbea road bike that uses a 12x142mm thru-axle on a Wahoo Kickr Snap trainer . The design is taken from the original Wahoo Kickr Snap 12x142mm Thru Axle fine Adaptor , with…
A dumb block to rise a smart trainer. This block rises the Wahoo Kickr Core smart trainer by 30mm. Useful when using a steering device (e.g. the ELITE Sterzo Smart ) to level your bike. The block provides two zip tie channels for fixing…
Adapter for mounting regular bottle cage to Wahoo KICKR Indoor Cycling Desk . I tend to need more than two bottles when riding indoors, so made these to hold additional bottles within reach. Mounts to slot meant for phones and tablets.…
In the slim chance any would ever need this. Got annoyed with those rubber holders that come with the fan and strap to your handlebar and made this. Holder for remote(s) for probably the best indoor training fan there is, Vacmaster…
I purchased a Wahoo Kickr V6 used and it was missing this adapter. Printed in PLA with the flange closer to the bed, support on, no post-processing required other than removing the support material. STEP file included in case you need to…
The Kickr Core transmits its noise extremely strongly on wooden floors. You can hear it throughout the house, especially at high speeds and sprints. The rubber dampers stop the noise significantly. Recommended printer settings for a 80 kg…
I have had heard about something like this already and have seen a buyable version on Amazon Germany for about 80 € without Tennisballs, that was way to expensive for buying 3d printed parts for me, therefor I quickly designed this part…
Use the holes in wahoo kickr desk to put more stuff
A simple way to organize your cables on your Wahoo Fitness KICKR Indoor Cycling Desk
This foot is made to stabilize the Wahoo Fitness KICKR Indoor Cycling Desk Stand. Print two for each corner. Snaps on and stays in place with no extra pieces. No supports required.
This is a replacement cap for my KickR 2017 model indoor bike trainer. The original cap kept coming off. I printed the samples with a MK3s+ with a version 2 mmu. The mmu is not needed for the colored text. Print the cap face down. If you…
My Wahoo kickr (Core) always slightly moved left to right and (based on my situation) I wanted him to be places as far back on the board as possible.
Power Brick Holder for the Wahoo Kickr. Print with supports. I didn't have much mounting space so small nails are required and the mounting process is a little tedious. The power brick slides in pretty snuggly. Can fit a power brick with…
Mount a bike with a 142x12mm thru axle (most modern road frames, older non-Boost MTBs, etc) on the old Wahoo Kickr v3 (2017) Is it strong enough? I wouldn't print this in PLA no matter how solid you make it, and don't think PETG would be…
Just a simple holder for the endcaps that fit a Wahoo Kickr v3. (2017) Might fit other Kickrs, I'm not sure and don't have any to check. This just holds the three pieces that go on the trainer to use a bike with a quick release axle when…
I created this adapter to solve the problem which could leads to expensive rear dropouts damage of your carbon bike frame. When you are using Wahoo Kickr Climb with your Kickr trainer and original metal rear thru axle adapter supplied…
A full 20 minutes of my life were spent drafting this very rough replica of a Kickr V6 schlepping handle. Printed it out, installed immediately, and the slight imperfections have not kept me up at night. This is NOT a PLA project. Please…
CURBKICKR is the first-ever portable kicker ramp engineered to interlock seamlessly with any standard curb or 3–6 inch concrete barrier. Designed for riders who see jumps everywhere, Curbkickr instantly transforms parking lots into clean,…
I don't have a nice color 2D printer, but I've got a 3D printer, so I made a Mac OS "beach ball" for my Wahoo Kickr (this model is the Core but I think the flywheels are all the same size) indoor trainer. Serves no purpose at all. Needs a…
Printed in PETG with a 0.8 mm nozzle. The .3mf file includes modifiers to increase the density and the thickness of the vertical walls. Wahoo KICKR Core 2 version:
The original version does not include any front damping. This version is heavily modified compared to the original, as the bike height has been raised by 3 cm, allowing the creation of a front support. With this change, the effect of the…
Really not all that different than all the others out there, but I wanted to soften the look a little and reduce the material required. I printed these out of ABS with 30% gyroid infill.
Printed in PETG with a 0.8 mm nozzle. The .3mf file includes modifiers to increase the density and the thickness of the vertical walls; it will only works if you use PrusaSlicer. If you don't use PrusaSlicer, use the .stl file and make…
I created this adapter to solve the problem which could leads to expensive rear dropouts damage of your carbon bike frame. When you are using Wahoo Kickr Climb with your Kickr trainer and original metal rear thru axle adapter supplied…
CURBKICKR is the first-ever portable kicker ramp engineered to interlock seamlessly with any standard curb or 3–6 inch concrete barrier. Designed for riders who see jumps everywhere, Curbkickr instantly transforms parking lots into clean,…
