1 / 6
Wahoo KICKR CORE 1 Tennisball Rocker Feet — image 1
1 / 6

Wahoo KICKR CORE 1 Tennisball Rocker Feet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wahoo KICKR CORE 1 Tennisball Rocker Feet to have a more dynamic and comfortable setup when riding

Rating
4.667 / 5
Likes
17
Downloads
430
Makes
3
Views
1,867
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Wahoo KICKR CORE 1 Tennisball Rocker Feet to have a more dynamic and comfortable setup when riding.

in addition you'll need two tennisballs per feet, so 8 in total.

  • fits easily on 225 x 225 printbeds

  • prints without supports

  • make sure to have shrinkage settings right for the 40 mm bore

    • it should be a snug fit - you might need a few taps with a hammer and a little grease to fit it on the pipe 

  • printed with PLA+, 0.8 mm Nozzle, 15% Gyroid Infill, 2 walls, 4 top and bottom shell layers

    • prints in about ~2.5 h using ~150g filament

    • seems plenty strong, with 85kg rider

Tags