Break-in helper for Brooks leather saddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This device helps to make the dents for your sit bones in a brooks leather saddle (especially the Brooks B67).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Leather bicycle saddles need to be broken in to fit your anatomy. This can be a painful process over thousands of kilometers. This device may speed up that process and helps to make the dents for your sit bones. It is designed for the Brooks B67 but may work on other saddles, too.
You can measure you sit bone distance with this method: https://bikefit.com/blogs/bikefit-blog/sit-bones-width-measurement-and-bike-saddle-selection
Preparation:
- Download and open the freecad file.
- Click on the spreadsheet and change the seatbone distance, the included stl files have it set to 110mm
- Mark the top object and export as stl, same with bottom.
Printing
Print with 5 perimeters/wall loops and 50% infill for enhanced strength.
Usage
- Always use grease to maintain your saddle.
- Position the upper part on the saddle and the bottom part on the rails below the saddle. With a screw clamp put pressure on the leather part.
