Ring Camera Standalone Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small profile mount for stand alone operation of a ring camera. Uses the Ring camera mounting plate and screws
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple stand for a wall mounting ring camera that will enable it to stand alone. For example if you wanted to put it on top of a shelf, a building, etc. It does not have mounting holes in the feet. I designed it to use minimal material, but still maintain a stable stance for the camera. The batteries can be replaced by tilting the camera backwards, changing the batteries, then tilting the camera back down to the desired position. I suggest using PETG if you plan to place this outside. The screw holes are well sized, so with some effort, you can mount the base plate on the stand.