1 / 5
Gridfinity Drill Bit Trays, 1 mm to 13 mm HSS, and 3 mm to 8 mm Wood Drill Bits — zdjęcie 1
1 / 5

Gridfinity Drill Bit Trays, 1 mm to 13 mm HSS, and 3 mm to 8 mm Wood Drill Bits

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3 x Gridfinity Drill Bit Trays for easy access to most used drill bits

Ocena
0 / 5
Polubienia
3
Pobrania
48
Wydruki
0
Wyświetlenia
239
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Gridfinity Trays all 4U wide x 4U high x 3U deep. Drill bit pockets are dimensioned to fit standard DIN 338 drill bits.

Details of the trays:

  1. Small Bits Tray for drill bits from 1 mm to 8 mm (in 0.5 mm increments). Also includes 3.2 mm and 4.8 mm bits commonly used for pop rivets.
  2. Big Bits Tray for drill bits from 8.5 mm to 13 mm (in 0.5 mm increments). The bits are quite close together - press down on the bottom end of the shaft to tip the drill bit
  3. Wood Bits Tray for 3, 4, 5, 6, 8, and 10 mm wood drill bits with the sharp tip. This tray also includes a big pocket for any odds or extra bits.

Printing tips

I printed the trays using PLA+, 0.4 mm nozzle, 0.2 mm layer heights.

To accentuate the text do a color change to the desired text color at 20.4 mm, and another color change back to the original color at 20.8 mm. See screenshots below:

Color change to the Text Color (Blue in this case) at 20.4 mm

 

Color change back to the original color (shown as yellow but should actually have been red again…) at 20.8 mm