Gridfinity Drill Bit Trays, 1 mm to 13 mm HSS, and 3 mm to 8 mm Wood Drill Bits
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3 x Gridfinity Drill Bit Trays for easy access to most used drill bits
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 48
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Gridfinity Trays all 4U wide x 4U high x 3U deep. Drill bit pockets are dimensioned to fit standard DIN 338 drill bits.
Details of the trays:
- Small Bits Tray for drill bits from 1 mm to 8 mm (in 0.5 mm increments). Also includes 3.2 mm and 4.8 mm bits commonly used for pop rivets.
- Big Bits Tray for drill bits from 8.5 mm to 13 mm (in 0.5 mm increments). The bits are quite close together - press down on the bottom end of the shaft to tip the drill bit
- Wood Bits Tray for 3, 4, 5, 6, 8, and 10 mm wood drill bits with the sharp tip. This tray also includes a big pocket for any odds or extra bits.
Printing tips
I printed the trays using PLA+, 0.4 mm nozzle, 0.2 mm layer heights.
To accentuate the text do a color change to the desired text color at 20.4 mm, and another color change back to the original color at 20.8 mm. See screenshots below:
Color change to the Text Color (Blue in this case) at 20.4 mm

Color change back to the original color (shown as yellow but should actually have been red again…) at 20.8 mm
