Samsung Wireless Puck and Smartwatch Charger Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone and Smartwatch stand/dock with Samsung Wireless Puck mount
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 1227
- Wydruki
- 1
- Wyświetlenia
- 2900
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
I had an old Samsung Wireleless puck I wanted to start using to spare my USB-C port the stress of being used daily. There were two or three available but all of them had significant problems and didn't suffice in my needs.
This model boasts a clip-in design for the wireless puck with both vertical and horizontal mount points for your phone. Care has been put into making it easily changeable for a different size phone (from the .blend file and the .stl files). It also has a docking section for a smartwatch.
This model was designed for a Samsung S21 FE phone and an unbranded KOM9 smartwatch. It should be relatively easy to adapt it to any other type of phone and smartwatch though.
The slope of the lean is 10 degrees.
It features a clip-on watch body cover/top and a clip-on wire cover at the back.
Blender 4.5.2 LTS was used to design this model along with the ‘MeasureIt’ add-on.