Bambu Lab A1 Fan Holder (Attached to the Screen)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fan holder for Bambu Lab A1. It is designed to be used in a automation setting.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a fan holder for Bambu Lab A1. It is designed to be used in a automation setting.
I use it to automate my Bambu Lab A1 based on the brilliant video of Factorian Design: Automate your Bambu Lab A1 & A1 Mini!. It is designed for Noctua NF-F12 but might work with other 120mm fans too. There is a compartment at the back for keeping a PCB and cables (I'm using a voltage regulator). Here is my edited G-code based on his work: github.com/yekta/bambu-a1-gcodes. Please be careful if you are going to use these G-codes and test it throughly and carefully.
Non-printed part requirements:
- M3 30mm (35mm is fine too) screw → Quantity: 2 → For screwing the fan in place
- M3 nut → Quantity: 2 → For securing the screws in place
You have my permission to improve the model, share it, produce it, sell it. Just don't re-upload it without any changes (basically don't have malicious intent). I added the STEP and SolidWorks files so that you can edit easier. If you are using Onshape, you can copy and edit the entire project using the link below.
There is also a button holder for activating and deactivating the fan. It can be found here: Link to the Button Holder.
