LED Rope Light Mounting Clip for Multiboard Tiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting clip for securing LED rope lighting to Multiboard Tiles using the “Small Thread” holes in the tile boards.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed clips to mount some LED color changing rope lighting behind a Multiboard installation. I used the Multiboard “Remixing Files”, from the Multiboard.IO website, to create a springy clip that utilizes the “Small screw” attachment points on the Multiboard Tiles to mount my LED Rope Lighting.
A mounting clip for securing LED rope lighting to Multiboard Tiles using the “Small Thread” holes in the tile boards. I used these LED color changing rope lights, but any variant should fit in the clip, as it is stretchy, by design.
https://www.amazon.com/dp/B0CHW1XBGG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Simply print as many clips as you need, screw them into the small mounting holes in your Multiboard, and push the LED int the flexible clip.
MAKE SURE THAT YOU HAVE GOOD BED ADHESION, AS THE PARTS ARE SMALL AND HAVE LIMITED BUILDPLATE SURFACE CONTACT.
If you have any doubt, use a small brim. I use Nano Polymer Adhesive on all of my PEI plates and have never had any problems with small parts detaching from the buildplate while printing. Your mileage may vary. LOL
I needed clips to mount some LED color changing rope lighting behind a Multiboard installation. I used the Multiboard “Remixing Files”, from the Multiboard.IO website, to create a springy clip that utilizes the “Small screw” attachment points on the Multiboard Tiles to mount my LED Rope Lighting
Thank you for taking a look!