Tool Stand for MGN12 rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice way to put your unused toolheads on a display. Also could be used while assembling them before you put it on.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I was using an amazing stand by Lucendi (Voron toolhead display stand) for my very first StealthBurner that I've assembled. But then I needed to put 3 more heads next to it and realised that it takes quite some space. I then got inspired by another one by BaGoon (Voron v0.2 Toolhead Display Stand) and decided to make my own.
This toolstand requires no support to print and no steps to assemble. Just add standart voron-spec threaded inserts and attach your toolhead.
Printing
I recommend using at least 4 walls and gyroid infill. 20% should be plenty enough.
For print orientation simply put it on the side:
BOM
- M3 Heatset Inserts 4x Voron Standart (M3x4x5 — 4mm length, 5mm outer diameter)