DJI Osmo Action 3/4/5 Pro Handle Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A side grip for the DJI Osmo Action 3/4/5 Pro. Attached using the magnetic quick release mount.
- Ocena
- 4,8 / 5
- Polubienia
- 69
- Pobrania
- 592
- Wydruki
- 5
- Wyświetlenia
- 3091
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Side handle for the DJI Osmo Action 4 camera. It will also work for the 3 and the 5 Pro
To assemble, simply put the magnetic mount in the side of the handle (make sure it's the right way around). Then slide the safety pin in the bottom; it should hold by itself quite firmly. If you want a permanent fit, you can glue the safety pin in place, but for my use, I find it's not necessary. You can also add a lanyard on the side.
For printing, I recommend printing the two parts separately. Print the handle upside down. Print the pin vertically with a raft. Use 4 walls so that the pin holding the lanyard is a solid piece. This is what I did and it worked fine, but maybe there is a better way.
I printed in PLA and also tried PETG. PLA is good enough for daily use, but if you use it for something more intense, I would just use PETG.
This is my first model; it might not be perfect, so if you have problems or ideas on how I can improve, I would love the feedback.
Update: I uploaded the STEP files so it is easier to remix.