Filament slot for IKEA Lack eclosure Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament slot for case if you builded Prusa Enclosure V2 - MMU2S but doesnt have MMU2S.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I am building Prusa Enclosure V2 - MMU2S but currently my MK3S+ isn't equipped with MMU2S unit. This filament slot does not bend in the middle like other slots I've tried because the inner and outer parts are screwed together.
Installation: Make a hole according to the attached drawing ( used a handeld milling machine with a 9,5mm straight bit). When installing the slot, use the inner part to mark the center of the holes through the table top for the screws connecting the two parts together. Drill the holes with a 4mm diameter drill bit. Both parts are then screwed together from the inside with pan head woodscrews 3x12mm.