Filament slot for IKEA Lack eclosure Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.02 – €2.47 net (excluding VAT)
For file: Filament_slot_in_0.2mm_PETG_MK3S_2h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.25 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 2.34 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Filament slot for case if you builded Prusa Enclosure V2 - MMU2S but doesnt have MMU2S.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 457
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I am building Prusa Enclosure V2 - MMU2S but currently my MK3S+ isn't equipped with MMU2S unit. This filament slot does not bend in the middle like other slots I've tried because the inner and outer parts are screwed together.
Installation: Make a hole according to the attached drawing ( used a handeld milling machine with a 9,5mm straight bit). When installing the slot, use the inner part to mark the center of the holes through the table top for the screws connecting the two parts together. Drill the holes with a 4mm diameter drill bit. Both parts are then screwed together from the inside with pan head woodscrews 3x12mm.