One Piece Raspberry Pi Zero 2 W + Pi Camera case and stand/ articulating wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Superrei's Raspberry Pi Zero + Camera Case. I'm using it with my Raspberry Pi Zero 2 W and a Pi…
- Ocena
- 4,6 / 5
- Polubienia
- 66
- Pobrania
- 462
- Wydruki
- 10
- Wyświetlenia
- 4286
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of Superrei's Raspberry Pi Zero + Camera Case. I'm using it with my Raspberry Pi Zero 2 W and a Pi Cam. Note that the case is still print-in-place. It does not snap together but rather works like a book cover.
I have added some venting holes as well as pockets for M2 nuts to safely attach the Pi to the case with M2x8 screws.
My Pi works with Mainsail, a webinterface for the Klipper firmware, but Octoprint should work as well. Thus, I needed a simple way to direct its camera to my printer.
That's why I used the parts of Kanata's Logitech C270 Articulating Arm
https://www.thingiverse.com/thing:2153209
(which I already printed years ago) and modeled a compatible attachment piece. You can simply put the case into that part, which should hold it safely in place.
I have also included the attachment piece as a simple stand to use without the articulating arm.
Print Settings
Printer:
Anycubic i3 Mega
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Sunlu PETG
Black
Notes:
The tolerances of the attachment piece/ stand and the case are really small to guarantee a tight fit. You might want to scale them up by a little if your printer is not calibrated well.
Category: 3D Printer Accessories