One Piece Raspberry Pi Zero 2 W + Pi Camera case and stand/ articulating wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of Superrei's Raspberry Pi Zero + Camera Case. I'm using it with my Raspberry Pi Zero 2 W and a Pi…
- Rating
- 4.6 / 5
- Likes
- 66
- Downloads
- 462
- Makes
- 10
- Views
- 4,286
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a remix of Superrei's Raspberry Pi Zero + Camera Case. I'm using it with my Raspberry Pi Zero 2 W and a Pi Cam. Note that the case is still print-in-place. It does not snap together but rather works like a book cover.
I have added some venting holes as well as pockets for M2 nuts to safely attach the Pi to the case with M2x8 screws.
My Pi works with Mainsail, a webinterface for the Klipper firmware, but Octoprint should work as well. Thus, I needed a simple way to direct its camera to my printer.
That's why I used the parts of Kanata's Logitech C270 Articulating Arm
https://www.thingiverse.com/thing:2153209
(which I already printed years ago) and modeled a compatible attachment piece. You can simply put the case into that part, which should hold it safely in place.
I have also included the attachment piece as a simple stand to use without the articulating arm.
Print Settings
Printer:
Anycubic i3 Mega
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Sunlu PETG
Black
Notes:
The tolerances of the attachment piece/ stand and the case are really small to guarantee a tight fit. You might want to scale them up by a little if your printer is not calibrated well.
Category: 3D Printer Accessories