Hold my guitar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hand for holding things. Designed as a guitar holder
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just a hand grabbing a guitar.
It's a bit tight, so the guitar has to be twisted. If it doesn't fit your guitar you may have to rescale it a bit.
For the wall mount i just rely on a hole and friction. I used a 8mm threaded rod with some plastic as an dowel / adapter on both sides. It's just one hole, that has the advantage that it can rotate, so the guitar hangs vertically and also it makes it easier (or even possible) to remove the guitar in tight spaces like in the picture.
The hole in the wall had an 8.5mm diameter. You probably have to print your own adapter or fixtures.