Zoron Velocitus Maximus (Doron Velta)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modded design of the famous Doron Velta
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updates
A little warning concerning the M4P
Just shared a PrusaSlicer project with the full profile.
In short
This is my interpretation of a Doron Velta. I used many other designs to get mine going, so credit goes to the original designers. The uploaded fusion file has all parts in it that I used, beside the print head that I uploaded separately.
Use
You can extract all parts from it as stl and print them. All of them were designed to be printable, most of them on a C1, a few only on XL due to the size.
Disclaimer
Due to the geometry you will loose some radius. This wasn't my concern. A diameter of 60 mm is sufficient for me. I haven't gotten to print with that thing yet, but I wanted to share the design with you. For my config, you are always up to date at https://github.com/huskyte/DoronVelocitusMaximus.
A few words
The PTC and the door work really well, but I did not intend to build a high temp printer. This is just for elevated ambient temperatures, the direct extruder might suffer too much from 55 °C or higher. Most parts used are easy to identify and source, but there is nothing fancy in this design. Standard screws is the norm. It can all be nicely cleaned up, but it is tight. Not overly, but it is not a 500 mm RatRig with room to spare.
Attached print profile
I also attached a project file. I was fed up that noone seems to share a PrusaSlicer profile. AFAIK if you import it with all tick marks you will get my filament, my print settings and my printer profile. Just save it as yours.
Manta M4P CM4
Keep in mind the M4P with a CM4 is pretty much on the limit as for the 5V rail. Adding lots of disco sticks doesn't help. I had to reduce the number of lights and brightness to get it stable. The next time I open it up I will probably push one or both disco sticks over to the Klipper Expansion board and see how that goes.