Tent Pegs – Support-Free, Strong & Lightweight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tent Pegs for Camping, Outdoor use or just your next festvial visit!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This improved version of my tent peg design is now even more practical:
Thanks to the optimized geometry, no supports are needed, making the print faster and cleaner. The orientation has been adjusted for better stability, whether you're using them in the garden, while camping, or at a festival.
Each peg uses only about 3 grams of filament, making it quick to print and surprisingly durable. Perfect as a lightweight backup set or for everyday outdoor use.
Recommended Print Settings:
- Material: PLA or PETG
- Layer height: 0.2 mm
- Infill: 25% (you can adjust to 100% if you need even more strength)
- No supports required
Tested, reliable, and ready to go – just print and you're set!