1 / 13
Magnetic Gel Holder Ring for Godox AD100, AD200, V1 (Ø 3 × 3 mm Magnets) — zdjęcie 1
1 / 13

Magnetic Gel Holder Ring for Godox AD100, AD200, V1 (Ø 3 × 3 mm Magnets)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Snap-on magnetic ring that lets you mount color gels cut into discs on Godox round-head flashes (V1, AD200Pro etc.)

Ocena
5 / 5
Polubienia
14
Pobrania
77
Wydruki
1
Wyświetlenia
529
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Overview

Two part, threaded holder that uses 3x3 mm magnets to snap colour-correction gels onto Godox round heads. Sized for gels cut to Ø 70-71 mm.

Compatibility

Godox AD100 Pro

Godox V1 (all mounts)

AD200/AD200 Pro with H200R round head

Any speedlight fitted with the S-R1 / R2 adapter

(All share a 75–76 mm magnetic rim.)

Print settings 

0.4 nozzle works but 0.2 mm or 0.25 nozzle recommended (reason: there are very thin walls around the magnets & the thread is very fine)

Material:

  • PC blend recommended (rigid, accurate, heat resistant)

  • PLA works: acceptable rigidity and good dimensional accuracy but low heat resistance

  • PETG is too flexible for the threads to work correctly.

  • maybe, theoretically: ASA.

Layer height 0.1 - 0.12 mm

Supports: none

Seams: use seam preview and make sure none are at the thread start

Model:

I have included the Fusion 360 file for anyone to be able to modify it for slight differences in the size of magnets they have on hand (see User Parameters / magnet_diameter).

Multicolor model:

If you can print multicolor, that is a great way to label these rings so you will find the right strength of CTO gel even in the dark (well, maybe if you use fluorescent filament). I've uploaded files labeled for popular gels such as CTOs, CTBs, plus and minus green.

Assembly:

  1. Cutting the gels into discs (options):

  • See Circle Cutter for Round Flash Gels on my profile.

  • Or

  • source or print any non-puncture circle cutter for paper,

  • Or

  • print a 70-71mm disc out of any material and use it as a template for cutting with scissors or box cutter (see the STL: DISC CUTTING TEMPLATE.stl)

  • Cut discs 70-71 mm in diameter.

  1. Press the 3 × 3 mm magnets into the inner plastic ring.

Magnet orientation: You can orient magnets either way and they will snap to the flash head steel ring. However, you may run into issues with Godox magnetic modifiers, so if you have one on hand i highly recommend you test before you assemble! Proper orientation is with the north pole of the magnet towards the flash head. https://eu.brisingi.com/faq/where-are-the-north-pole-and-south-pole-on-a-magnet

  1. Screw the rings together.

  • see photos or 3MF project files for orientation

  • Might take 2-3 tries (limited height means no guiding surfaces, so it is prone to misthreading)

Usage notes

One gel per ring – This is not designed for the user to switch the gels in one ring constantly, but to make one ring for each gel. This approach seems less fiddly to me, but do as you wish.

Stacking rings works - but creates a sort of tunnel/snoot in front of the flash. Inside umbrellas and umbrella softboxes or bouncing flash this shouldn't be an issue, but with other modifiers success might vary.

Version notes

this is version 3. (see v1 and v2 in archive folder).

Changes: 

V3: 

  • added knurling on outer ring for better grip

  • increased magnet hole height by 0.2 mm

  • improved thread printability

V2:

  • 2 parts instead of three (simpler).

  • Slightly larger diameter ( easier to remove from flash head)

  • Removed outer lip. The lip interfered with simple printing (supports introduce unnecessary variables) and provided a bit more security. However, the sheer number of magnets is enough for a secure hold.

  • Improved thread: v1 kept misthreading. Partially fixed but might require editing the User Parameter thread_offset to get good results on different printers

  • Larger diameter hole for gel disc: means the gel is less likely to slip out if poked by anything in a bag.

Related models:

Tagi